What thickness of corrugated sheet is best for a fence – choice of brand, coating
Iron sheets in the form of cut sheets in combination with reliable supports are a durable and strong fence for any suburban area or country house. But such a result can only be ensured if you choose good corrugated sheeting for the fence. To do this, you need to understand its appearance, markings, and aspects of real estate. Before buy corrugated sheeting for a fence in Simferopol > you should familiarize yourself with its properties on the website of the Proflist Sandwich company.
Contents of the article:
In this note, we offer the most important factors for a meaningful purchase and give a brief description of any type of material.
Users often search for:
- Fence made of iron siding under timber;
- Types of fence nets – choice of material.
The raw material for such fences is thin sheet steel, which is rolled using rolling equipment. As a result, the smooth sheet takes on a wavy (corrugated) shape. The main function of such shafts is to increase the load-bearing capacity and strength of the material.
Therefore, if you need to choose corrugated sheeting for a reliable fence, you should pay attention to the size of the corrugations: the larger they are, the more resistant the material is to mechanical stress.
Types of metal
For the production of profiled sheets, 2 types of raw materials are used:
- Zinc A layer of zinc 90 microns wide or more with a density of 275 g per 1 m2 is applied to steel. m. Often the manufacturer’s warranty is no more than 5 years, but in practice such a fence can last up to 10 years. The short period is explained by the instability of the coating – zinc weathers over time, which actually makes the steel vulnerable to atmospheric influences. Unpainted sheets can be used for temporary fence sections, as they do not look very presentable;
- Aluminum-galvanized. Elements: 55% aluminum, 45% zinc, 1. 6% silicon. Significantly more resistant to precipitation and high humidity, resulting in a warranty period of more than 10 years.
It is worth noting that painted products, although they will become more expensive, will look more beautiful.
- How to attach corrugated sheeting to a fence;
- Homemade fence made of corrugated sheets.
Grades of corrugated sheets suitable for fences, their characteristics
The marking of the profiled sheet is deciphered as follows:
- N – load-bearing, recommended for roofing;
- C – wall, purchased for the construction of fences, cladding facades of apartments, outbuildings;
- NS is universal, can be chosen for any building, and is also suitable for a fence.
After the brand abbreviation there are numbers indicating the profile height, sheet width and steel thickness. These are the main characteristics when choosing material for a future fence.
Let’s look at commonly used options for creating a solid fence.
С8
This is first class and cheap material. The profile height is 8 mm. It is used for cladding front walls, decorative, temporary fences in places where the vertebrae are found lightly.
C10
This grade of sheets is still cheap, but with a larger steel width. The profile height is 10 mm. You can choose any color. You should not use fences more than 1. 5-2 m high.
S14, S15
Material with thickened steel. Profile height – 14 and 15 mm. If the area is subject to strong wind loads, then this profile is a good conclusion.
S20 (MP20)
The generally accepted marking of sheets is C20, but the designation MP20 is also used. This time and what the canvas represents. The final took place at the Metal Profile plant, link and abbreviation. The working height of the profile is 18 mm. What distinguishes it from other brands is the different volume of trapezoids on both sides. Service life reaches 35 years.
C20 is universal, as it is applicable for both external and internal applications (fences, roofs, walls, facades).
Suitable for areas with difficult climatic conditions. Manufacturers began to supply it in 3 modifications: A, B, R. The first 2 are excellent at resisting wind. The latter cools under static loads, making it suitable for roofing.
S21
The optimal canvas for hedges under slopes. The profile height is 21 mm. The highest hardness of the corrugated sheet allows it to be used advantageously both for summer cottages and, for example, for industrial production.
How to choose the right thickness of corrugated sheeting
This feature affects the durability and stability of the entire system.
For fencing, it is recommended to purchase sheets with a width of 0. 45-1 mm. If you have a corrugated sheet with the smallest width, then it can be registered as sections when the metal profile is tightly welded onto the frame.
Before purchasing, you should measure the canvas or ask the paper seller, who will indicate the characteristics of the sheets.
Which coating is more reliable?
There are a huge number of types of protective coating for profile sheets. All of them ensure the stability of the material:
- Corrosion;
- Atmospheric precipitation;
- Temperature changes;
- Ultraviolet (paint does not fade in the sun).
Most foam blocks that choose to use a basic galvanic coating contain a shiny metal core, but this material is not suitable for everyone.
A wide selection of colors is presented with a polymer coating, which, in fact, makes them more popular than others.
Separately, it is worth mentioning the double-sided profiled sheet, which, for example, is identical to the facade from the inside.
Color range
Available in different colors. Most manufacturers use the Ral table, for example, to ensure that products from different companies are presented in the same range.
The most popular canvas is made using printech technology, which very well imitates natural granite, brick, wood and clay. You can also choose a glossy or matte surface.
In addition, almost all companies began to produce European fences from corrugated sheets. The upper edge of the sheet is specially sharpened to bring it closer in appearance to a traditional wooden fence.
Calculation of the number of sheets per fence
To find out how much material is required for the sections, you need to divide the total length of the fence by the width of the corrugated board. If you need an amount in square meters, then the purchased quantity is multiplied by the width and length of 1 sheet.
It is important to understand that there are actually 2 widths: general and installation (working). In this case, the 2nd picture is smaller than the first, since the corrugated sheet apparatus overlaps.
Popular foreign and domestic manufacturers
According to the majority of buyers, we will consider more reliable manufacturers.
RUUKKI
Finnish manufacturer of building materials. One of the areas of work is the creation of a professional bow. Has consulates in many countries. The quality of the product justifies the higher price.
ArcelorMittal
Founded in 1976 in the metropolis of Luxembourg. One of the world’s largest companies producing steel and related materials. It has a number of representative offices in European countries. There is a research laboratory where scientists are working to improve the technical characteristics of the material.
Emimar
The company is located in Latvia. It was founded back in 2007.
Specializes in production:
- Sandwich panels;
- Siding;
- Skylights;
- Corrugated sheets and other building materials.
Also produces products to order.
Metal Profile
The Russian company is the leader in Russia in the production of metal products. It has been operating for over 18 years. There are consulates and stores in Belarus and Kazakhstan. Produces profiled sheets from C8 to H114. The cost of production is lower than that of foreign companies.
Steele-Plasse
The production line was put into operation in 1997. Works with large wholesale clients, construction companies, and individuals. Manufactures corrugated sheets from C8 to H158. Offers a huge selection of protective varnishes and paints.
Profmetal
Russian manufacturer. The main goal is to produce profiled sheets. The creation is carried out on modern Polish equipment. The model range is presented from C8 to H114.
Recommendations for choosing high-quality profiled sheets
When choosing the thickness of a product, the marking indicates the quantity without taking into account the protective layer. A suitable indicator is from 0. 5 mm.
- There should be no roughness, unevenness, or dents on the edges of the leaves;
- The color of the entire batch and thickness must be the same;
- Differences in width are excluded, the length of the material is greater than allowed by GOST 19904-90;
- You should not purchase a profiled sheet whose surface has swelling or scratches, even if the cost is significantly reduced;
- The sheet interface should be even and smooth;
- The shaft on the canvas must overlap the shaft without any errors in the past;
- It is better if the purchased canvas is wrapped in film. For example, they protect it from unnecessary scratches during transport.
At the end of the purchase, the dealer is required to issue a warranty card and a receipt.
What other components will be needed?
In addition to the sectional material for the cabinet, it is necessary to select the raw materials for the columns, and also clarify whether a foundation is needed. The main point here is the depiction of gender.
If you have a regular, non-floored site, then any iron support will be poured flawlessly. Profile pipes 60*40 mm are used as racks. It is necessary to repair the frame with joists. These will be pipes with a cross section of 40*20 mm. For one section, 2-3 delays are enough. Average consumption of self-tapping screws per 1 sq. M – from 5 to 7 parts.
Craftsmen recommend welding load-bearing pillars on top so that excess moisture does not get there.
For decorative purposes, a plank in the shape of the letter P is attached to the top of the sheets on the mounted fence.
When choosing a profiled sheet for the construction of a building, not only the appearance is taken into account, but also the climatic conditions of the area, the likely load, and the purpose of the fence. It will not be useless to understand the markings, which reflect the quality of the material.
