Characteristics of the cantilever pump

Of the total volume of pumping equipment produced by the global industry, cantilever pumps account for 60-70%.The console pump “K80-65-160” is a single-stage, horizontal, centrifugal pump, it has at its disposal a horizontal liquid supply along the axis and a vertical outlet directed upward. Such a pump is related to the centrifugal type and can provide greater output pressure, this primarily occurs due to the fact that the impeller will rotate at a higher speed.

Cantilever pumps series to 80-65-160 are used for pumping water, with the exception of sea and other liquids with physical and chemical properties similar to water and which have a pH value in the range from 6 to 9 units. containing solids with a size of no more than 0. 2 mm, the volume concentration of which is up to 0. 1%.

Pumps “K80-65-160” have asynchronous electric motors designed for general industry and are intended for stationary use in enclosed spaces with direct ventilation. The bearing housing on the coupling side contains additional support and is attached to the pump housing. The pump and motor are secured to the foundation using special claws on the pump body. The pumps can be driven by electric motors through a coupling.

When viewed from the engine side, the pump rotor rotates clockwise in the bearing supports. The direction of its movement is marked by an arrow on the pump casing. To drain the liquid, a plug is installed at the bottom of the pump. The use of these pumps in industries associated with fire and explosion hazards is strictly prohibited.

All types of such pumps are reliable, economical and highly efficient. The cantilever pump is a high-quality and reliable design.