Heating radiators: choosing the appropriate option for a private home
if the question of which heating radiators to choose for a private home comes up on the agenda, there are quite a lot of those who, in a Soviet nostalgic impulse, remember cast iron “accordions” – although massive, they effectively warm the living space.It must be admitted that previously such batteries worked “effectively”, but now they become unusable and are considered obsolete. They have already been replaced by new, convenient, more efficient and most profitable models.
Before you begin installing a heating system for a private home, you should decide on the type of radiators that will be installed to transfer thermal energy. There are many options for such devices, differing in many characteristics. When choosing radiators for heating, which ones are best for a private home, you can find out by comparing the main characteristics of the devices and, based on the acquired information, make the right choice. By contacting Bilyuks, they will be able to advise you in choosing Which heating batteries are best for a private home?
choice for a private home
To heat a private home, you should not choose the cheapest models. Such devices may have used low-quality materials or were produced in violation of production standards. It is also not necessary to buy very expensive heating batteries for residential use, because in this case you can overpay twice as much for the product.
If you are guided by cost, then the most suitable option would be to purchase mid-price radiators in a certain category. The primary division of such products is carried out according to the material from which they were made and the type of movement of thermal energy.
Types
Radiator heating devices are made in various sizes and shapes, and of course they differ in the principle of heat energy release.
Tubular
Tubular radiators are undoubtedly non-separable units, but this flaw is compensated by the variety of sizes and shapes of such products on the market. Such structures are made from a large number of pipe sections that are connected to each other by inlet and outlet channels. Typically, tubular elements are made of steel, and therefore they have the same operational and technical characteristics as units made of ferrous metal.
The advantage of tubular radiators is the ability to produce products of huge sizes that can be installed in rooms with high ceilings.
Sectional
The advantage of sectional designs is that you can precisely select the product according to power. In advanced devices, these elements are joined by means of threads, so it is possible without much effort not only to disassemble standard factory products into smaller ones, but also to combine a number of individual parts into one heating device. Due to the presence of a large number of connections, sectional radiators can withstand less pressure, however, due to their versatility, these designs occupy the highest positions in the ratings of especially sold devices for heating systems.
Lamellar
Plate radiators are particularly effective heating devices. In this design of the heater, the heat-transfer surface is strengthened by welding a large number of thin metal plates to the pipe through which the coolant circulates. Due to the low inertia of heaters of this type, they can be used as basic heat sources in rooms or in a country house, where heating does not occur in a constant mode.
Plate radiators have a very simple design, which is why during operation any malfunctions in the heating system occur extremely rarely. The price of these products is low, since the production process is extremely automated and does not take a long time.
Panel
When ordering panel radiators, you need to calculate in advance the likelihood of installing these products. These products do not have sections, therefore, in order to install the device, you must know in advance the dimensions of the free space for installation. Panel heating models have a high degree of heat transfer, modern design and are easy to operate. A significant advantage of such structures is also their low cost, since the products are most often made of steel sheets. Among the main disadvantages of panel radiators are instability to water hammer and high acidity of the coolant.
Tips for choosing
The advantage of your own heating system is the absence of water hammer; for this reason, various types of products can be used for installation. You just need to remember that aluminum products are very sensitive to the high acidity of the coolant; therefore, if it is not possible to reduce this indicator, you will need to use devices when the liquid does not directly come into contact with the metal of the product or its alloys.
Heating radiators are efficient and modern components and, despite their relatively high cost, can transfer heat much more efficiently than any home-made products. Moreover, these products have a presentable appearance, which makes it possible to use them in a rather expensive interior.
